Logistics / INSIGHTS

Verified Gross Mass Submission: Method, Cut-Off and Amendment Controls

Published · 5 min read

A verified gross mass submission must reach the carrier and terminal early enough for vessel stowage planning. A container can be packed, sealed and gated in while its VGM record is missing, linked to the wrong container or based on an unapproved calculation. The physical shipment may then be ready while the loading condition is not satisfied.

Logistics teams should control the weighing method, authorised signatory, submission channel, cut-off and correction record as one process.

Define the Verified Gross Mass Submission Owner

Under SOLAS regulation VI/2, the shipper named on the bill of lading, sea waybill or equivalent transport document is responsible for providing the verified gross mass. The IMO guidance states that VGM must be communicated to the master or representative and the terminal representative sufficiently in advance for the ship stowage plan.

The operating file should identify:

  • legal shipper named in the transport document;
  • party arranging the weighing;
  • approved VGM method;
  • competent-authority requirements at the packing location;
  • person authorised to sign or authenticate the submission;
  • carrier and terminal submission channels;
  • VGM cut-off for the specific booking;
  • escalation owner for missing or rejected records;
  • amendment authority and evidence-retention period.

A forwarder, warehouse or weighbridge may perform an operational step, but the contractual responsibilities should remain clear.

Select Method 1 or Method 2 Correctly

The IMO guidelines provide two methods.

Method 1: weigh the packed container

After packing and sealing, the complete container is weighed using suitable calibrated and certified equipment under the applicable national requirements. The record should connect the measured mass to the container number and weighing event.

Confirm:

  • container number recorded at the scale;
  • scale or weighbridge identification;
  • date and time;
  • gross reading and any deduction method;
  • vehicle or chassis treatment where applicable;
  • calibration or certification reference;
  • weighing operator;
  • unit of measure;
  • seal number where captured;
  • signed or electronically authenticated result.

Method 2: calculate from all packed components

Method 2 adds the mass of all packages and cargo items, pallets, dunnage and securing material to the container tare mass. The calculation method must meet the certification and approval arrangements of the competent authority in the State where packing and sealing were completed.

Do not omit:

  • inner and outer packaging;
  • pallets and skids;
  • dunnage, timber and securing equipment;
  • refrigerants or other material inside packages where relevant;
  • container tare mass taken from the unit;
  • late-added samples, spare parts or documents packed as cargo.

The IMO guidance notes that certain bulk cargoes do not lend themselves to Method 2. Confirm method suitability rather than using a spreadsheet because it is convenient.

Reconcile VGM with Packing and Booking Data

Before submission, compare the VGM record with:

  1. booking number and carrier;
  2. container prefix and serial number;
  3. container size and type;
  4. tare mass shown on the container;
  5. packing list gross weight;
  6. warehouse load sheet;
  7. seal record;
  8. shipping instructions;
  9. unit of measure;
  10. voyage and terminal.

The packing-list gross weight and VGM do not always have to be identical because VGM includes the container tare and all packing and securing material. The difference should, however, be explainable and free from transcription errors.

Stop submission if the container number is incomplete, the tare belongs to another unit, the calculation excludes material, or the weighing evidence cannot be traced.

Control the VGM Cut-Off and Submission Status

Use the cut-off communicated for the actual booking, terminal and sailing. Do not carry a cut-off forward from a previous voyage or another port.

The shipment tracker should show:

  • carrier VGM cut-off and time zone;
  • terminal receiving cut-off;
  • planned packing completion;
  • planned weighing time;
  • internal review deadline;
  • submission timestamp;
  • channel or portal used;
  • carrier acknowledgement;
  • terminal acknowledgement where available;
  • final accepted status;
  • exception and escalation notes.

Submitting data is not the same as acceptance. Retain the confirmation, portal status or electronic message that shows the carrier received the VGM against the correct container.

Manage Amendments Without Losing the Audit Trail

A container may be reweighed, repacked or substituted after the first submission. Define when a correction is necessary and who can authorise it.

The amendment record should state:

  • original value and submission time;
  • reason for change;
  • revised weighing or calculation evidence;
  • new value and unit;
  • approver;
  • carrier amendment reference;
  • terminal update status;
  • effect on documentation and load plan;
  • confirmation that obsolete values are closed.

Never send a corrected figure only in an informal message while the portal retains the old VGM. Reconcile every active system and keep the superseded record for traceability.

Pre-Gate and Pre-Cut-Off Checklist

  • Shipper identity matches the transport document.
  • VGM method is valid at the packing location.
  • Weighing or calculation evidence is complete.
  • Container number, type and tare are correct.
  • All packing and securing material is included.
  • VGM unit is clear and plausible.
  • Booking-specific cut-off and time zone are recorded.
  • Carrier submission is acknowledged.
  • Terminal status is checked where applicable.
  • Amendments are approved and fully reconciled.
  • Evidence is stored with the shipment file.

VGM is a condition for loading under the SOLAS requirements, but it does not create an entitlement to load. The master retains discretion, and other booking, documentation and terminal conditions still apply.

Takeaway

A controlled verified gross mass submission links the responsible shipper, approved method, container data, cut-off, acknowledgement and amendment history. This prevents a correctly packed container from reaching the loading stage with unusable or untraceable weight data.

Contact ZSCM Logistics at logis@zscm.ae to coordinate container documentation, VGM milestones and carrier handover controls.

References

More insights

FREIGHT / REQUEST A QUOTE

Plan your
shipment.

Share your cargo, route and dates so we can review the freight options and service scope.

Request a freight quote
ZSCM
ZSCM LOGISTICSTRANSPORT / SUPPLY CHAIN
Trading division ↗Return to the opening ↗